Analog Devices

14-Bit 1 GSPS High-Speed Pipeline Analog-to-Digital Converter (ADC) – High-performance ADC designed for software-defined radios (SDR), radar systems, communications equipment, satellite receivers, instrumentation, signal intelligence, wideband data acquisition, and high-speed embedded processing. The Analog Devices AD9690BCPZ-1000 provides 14-bit resolution with a maximum sampling rate of 1 GSPS, using a differential analog input and JESD204B serial digital output for high-speed connection to an FPGA or other high-performance digital processing device. It supports an approximately 2 GHz full-power analog input bandwidth, programmable differential input termination of 50 Ω, 100 Ω, 200 Ω, or 400 Ω, an integrated voltage reference, differential clock input, and flexible JESD204B lane configurations. At 1 GSPS, typical total power consumption is around 2 W. The device also includes two integrated wideband digital processing paths, including NCO and cascaded half-band filtering, which can reduce the amount of data that needs to be processed downstream. The AD9690BCPZ-1000 uses a 64-lead LFCSP package (9 × 9 mm), operates over −40°C to +85°C, and is listed by DigiKey as active. It is particularly well suited for systems where a high-speed ADC needs to interface directly with an FPGA through JESD204B, such as the AMD Kintex UltraScale+ FPGA you provided earlier.

SMPS Flyback Transformer for Capacitor Charger Applications – Surface-mount flyback transformer designed for capacitor charging circuits, isolated DC-DC converters, industrial power supplies, medical equipment, test instruments, laser drivers, photoflash systems, and embedded power applications. The Würth Elektronik 750032052 is part of the WE-FB Series, optimized for use with the Analog Devices (Linear Technology) LT3751 capacitor charger controller. It features a 10 µH primary inductance (measured at 10 kHz), 18 V to 30 V primary input range, and 1000 Vrms isolation voltage, providing efficient energy transfer in high-voltage capacitor charging designs. Constructed for surface-mount assembly, it operates over a −40°C to +125°C temperature range and is housed in a compact 21.97 × 28.70 mm footprint with an 11.58 mm maximum height, making it suitable for high-reliability industrial and embedded systems. #WurthElektronik #750032052 #WEFB #FlybackTransformer #SMPSTransformer #CapacitorCharger #LT3751 #DCDCConverter #IsolatedPower #IndustrialElectronics #EmbeddedPower #EmbeddedSystems

Power over Ethernet (PoE) Flyback Transformer – Surface-mount flyback transformer optimized for Power over Ethernet (PoE) powered devices, isolated DC-DC converters, industrial Ethernet equipment, IP cameras, wireless access points, IoT gateways, and embedded networking applications. Part of the Würth Elektronik WE-PoE+ Series, it is specifically designed for use with the Analog Devices LT4276 PoE PD controller and supports IEEE 802.3at (PoE+) power conversion. Features 38 µH primary inductance (100 kHz), 37 V to 57 V primary input, 12.5 V auxiliary winding at 30 mA, 1,500 Vrms isolation voltage, and operation over a 250 kHz to 400 kHz switching frequency. Built in a compact surface-mount package (13.46 × 15.00 × 12.70 mm), it is specified for −40°C to +125°C operation, making it ideal for high-efficiency isolated PoE power supplies in demanding industrial and embedded environments. #WurthElektronik #750310742 #WEPoEPlus #PoETransformer #FlybackTransformer #PowerOverEthernet #IEEE8023at #LT4276 #DCDCConverter #IndustrialEthernet #EmbeddedPower #EmbeddedSystems

Configurable Analog Front-End (AFE) Potentiostat for Electrochemical Sensors – Ultra-low-power programmable analog front-end designed for electrochemical gas sensors, toxic gas detection, air quality monitoring, industrial safety systems, wearable health devices, environmental monitoring, and embedded sensing applications. The Texas Instruments LMP91000 integrates a complete potentiostat and transimpedance amplifier (TIA), enabling direct interfacing with 2-electrode galvanic and 3-electrode amperometric chemical sensors. Operates from a 2.7 V to 5.25 V supply while consuming less than 10 µA typical supply current, making it ideal for battery-powered systems. Features a programmable TIA gain (2.75 kΩ to 350 kΩ), programmable load resistor, programmable cell bias, I²C-compatible interface, integrated temperature sensor, sensor diagnostics, and support for sensor currents from 5 µA to 750 µA full scale. Housed in a compact 14-pin WSON (4 × 4 mm) package and specified for operation over a −40°C to +85°C temperature range. #TexasInstruments #LMP91000SDXNOPB #LMP91000 #AnalogFrontEnd #Potentiostat #ElectrochemicalSensor #GasSensor #AirQualityMonitoring #IndustrialSafety #I2C #LowPower #EmbeddedSystems

Adjustable Low-Dropout (LDO) Linear Voltage Regulator – Positive adjustable LDO voltage regulator designed for power supplies, industrial control systems, embedded electronics, consumer devices, communication equipment, and analog circuits. Delivers up to 800 mA output current with an adjustable output voltage range of 1.25 V to 13.8 V using an external resistor divider. Operates from an input voltage up to 15 V with a maximum dropout voltage of 1.2 V at 800 mA, making it suitable for low-dropout linear regulation. Features 1% output voltage accuracy, 75 dB PSRR (120 Hz), 5 mA typical quiescent current, current limiting, and thermal shutdown protection for reliable operation. Designed for surface-mount applications in a TO-252-3 (DPAK) package and operates over a 0°C to +125°C temperature range. #TexasInstruments #LM1117DTADJNOPB #LM1117 #LDO #LinearRegulator #VoltageRegulator #AdjustableRegulator #PowerManagement #DPAK #EmbeddedSystems

24 Bit Analog to Digital Converter 4, 8 Input 4 Sigma-Delta 56-VQFN (7x7) The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode). Features • Simultaneously measure four or eight channels • Wideband filter mode: up to 512kSPS • Low-latency filter mode: up to 1365kSPS • Power-scalable speed modes: – Max speed: 512kSPS • 83mW (ADS127L14) • 165mW (ADS127L18) – High speed: 400kSPS • 64mW (ADS127L14) • 128mW (ADS127L18) – Mid speed: 200kSPS • 37mW (ADS127L14) • 74mW (ADS127L18) – Low speed: 50kSPS • 12mW (ADS127L14) • 24mW (ADS127L18) • AC performance with DC precision: (High-Speed Mode) – Dynamic range at 200kSPS: 112dB (typical) – THD: –118dB (typical) – INL: 1ppm of FSR (typical) – Offset drift: 10nV/°C (typical) – Gain drift: 0.5ppm/°C (typical) • Precharge buffered signal inputs • Programmable by pin setting or SPI • Frame-sync port for output data • Internal or external clock operation • Analog supply voltage: 2.85V to 5.5V 2 Applications • Test and measurement: – Data acquisition (DAQ) – Shock and vibration instruments – Acoustics and dynamic strain gauges • Factory automation and control: – Condition monitoring • Aerospace and defense: – Sonar • Medical: – Electroencephalograms (EEG) • Grid Infrastructure: – Power quality analyzers #ADS127L14IRSHT #TexasInstruments #ADC #DeltaSigmaADC #24BitADC #SimultaneousSampling #DataAcquisition #IndustrialAutomation #MedicalInstrumentation #PowerQuality #PrecisionMeasurement #EmbeddedSystems

ADRV9002BBCZ — Analog Devices dual narrow-band/wideband RF transceiver, 30 MHz to 6.0 GHz, up to 40 MHz Tx/Rx bandwidth, in 12 mm × 12 mm 196-ball CSP_BGA package option BC-196-16.

Differential MEMS Pressure Sensor – High-accuracy differential MEMS pressure sensor with 15-bit digital output and analog voltage output for medical devices, HVAC systems, industrial automation, airflow monitoring, leak detection, pneumatic control, and embedded sensing applications. Operates from a 3.0 V to 3.6 V supply and measures differential pressure from −1 kPa to +1 kPa (±0.15 PSI) with ±0.75% full-scale accuracy. Features I²C and analog output interfaces, integrated temperature compensation, 15-bit pressure resolution, embedded temperature sensor, 2.2 ms response time, and dual barbed pressure ports for direct tubing connection. Designed for surface-mount assembly in an 8-pin dual-port SMD package, it operates over a −25°C to +85°C temperature range and supports board-mounted differential pressure measurement. #WurthElektronik #2513130810102 #WSENPDUS #DifferentialPressureSensor #MEMSSensor #PressureSensor #I2C #AnalogOutput #TemperatureCompensated #AirflowSensor #IndustrialElectronics #EmbeddedSystems

The TMS320F280049CPZQR is a 32-bit real-time microcontroller from Texas Instruments' C2000 Piccolo family, purpose-built for high-performance digital power control, motor control, and other real-time embedded control applications. The device is centered around TI's C28x digital signal processing core, a fixed- and floating-point architecture specifically optimized for the kind of fast, deterministic mathematical computation required in closed-loop control systems such as motor drives, digital power supplies, solar inverters, and electric vehicle subsystems. This particular part number represents the "C" variant within the TMS320F28004x family, which grants access to an integrated Configurable Logic Block, a flexible programmable logic resource that allows engineers to implement custom digital logic functions directly on-chip, such as specialized PWM waveform shaping, custom protocol interfaces, or glue logic that would otherwise require an external FPGA or discrete logic devices. This variant also provides access to a secure ROM library containing TI's InstaSPIN-FOC technology, a field-oriented motor control solution that significantly simplifies the development of sensorless motor control algorithms by handling much of the underlying control theory and tuning complexity in pre-validated, secure firmware. Beyond its core processing capabilities, the device integrates an extensive set of control-oriented peripherals that are characteristic of the C2000 platform, including high-resolution pulse-width modulation outputs, enhanced capture modules, and a multi-channel sigma-delta filter module that enables isolated current and voltage sensing across an isolation barrier without requiring a separate digital isolator and decoder chip. A dedicated Control Law Accelerator runs in parallel with the main processing core, offloading time-critical control loop calculations so that the main core remains free to handle communication, supervisory logic, and other system-level tasks, which is particularly valuable in systems running multiple simultaneous control loops. Connectivity on the device is supported through a broad set of industry-standard communication interfaces, allowing it to interface with a wide range of external sensors, communication networks, and host systems without requiring additional bridge components. The device also supports TI's Fast Serial Interface, a high-speed, robust communication protocol intended to simplify board-to-board and module-to-module communication in multi-controller systems, an increasingly common need in distributed power and motor control architectures. This part is qualified to automotive electronics reliability standards, making it suitable for deployment in vehicle power electronics, traction inverters, onboard chargers, and other automotive systems where component robustness, extended temperature operation, and rigorous quality screening are required. The device also supports TI's functional safety documentation framework, providing the architectural transparency and failure mode analysis resources needed by system designers building safety-critical control systems around the device. It is housed in a surface-mount package suited to dense power electronics board layouts and is supplied in tape-and-reel packaging for automated assembly. Spec Sheet Identification Part Number: TMS320F280049CPZQR Device Family: C2000 Piccolo, TMS320F28004x Manufacturer: Texas Instruments Variant: "C" type — with Configurable Logic Block and secure ROM/InstaSPIN-FOC access Functional Classification Device Type: 32-bit real-time microcontroller Core Architecture: C28x digital signal processing core Math Acceleration: Floating-Point Unit and Trigonometric Math Unit for control-loop computation Parallel Control Processing: Integrated Control Law Accelerator Programmable Logic: Configurable Logic Block (CLB) for custom digital logic functions Motor Control Library: Secure ROM with InstaSPIN-FOC sensorless field-oriented control Memory Program Memory Type: Embedded flash memory Memory Architecture: Supports field reprogramming for firmware updates and calibration data storage Control & Analog Peripherals PWM Capability: Frequency-independent, high-resolution PWM outputs Capture Module: Enhanced capture (eCAP) peripheral Isolated Sensing: Multi-channel sigma-delta filter module (SDFM) for isolated current/voltage sensing Analog Integration: Integrated high-speed analog-to-digital converters and internal digital-to-analog converters Programmable Gain: Integrated programmable gain amplifiers Communication Interfaces Standard Interfaces: SPI, SCI, I2C, LIN, and CAN connectivity Power Management Bus: Fully compliant PMBus support High-Speed Module Interface: Fast Serial Interface (FSI) for board-to-board and module-to-module communication Target Applications Application Domains: Industrial motor drives, solar inverters, digital power supplies, electric vehicle and transportation systems, sensing and signal processing Environmental & Qualification Automotive Qualification: AEC-Q100 qualified Functional Safety Support: Documentation and architecture support for functional safety-compliant system design Lifecycle Status: Active production Package Package Type: Surface-mount quad flat package style (LQFP) Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, per part suffix designation #TMS320F280049 #C2000 #Piccolo #TexasInstruments #DigitalSignalController #RealTimeMCU #MotorControl #DigitalPowerControl #InstaSPINFOC #FieldOrientedControl #ConfigurableLogicBlock #AECQ100 #AutomotiveMCU #PowerElectronics #EmbeddedSystems #LQFP #SurfaceMount #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary

MAX86178 is an ultra-low-power clinical-grade vital-sign analog front-end (AFE) integrating synchronized PPG, single-lead ECG, and BioZ acquisition with I²C interface in a 49-bump WLP package for wearable medical devices. Keywords/Tags: MAX86178, vital-sign AFE, PPG ECG BioZ, wearable health monitor, 49-WLP