Thermistors

NTC inrush current limiter thermistor designed to reduce startup surge current in AC power supplies and other high-energy circuits. It has 10 Ω resistance at 25°C (±20%), supports up to 15 A steady-state current at 65°C, and a recommended 150 J energy rating, making it suitable for power supplies, motor drives, lighting, and industrial equipment. #NTCThermistor #InrushCurrentLimiter #CircuitProtection #Ametherm

10-Series Battery Monitor and Protector IC – Battery monitoring and protection IC for 3- to 10-series Li-ion, Li-polymer, and LiFePO4 battery packs. The Texas Instruments BQ76942PFBR provides cell-voltage, current, and temperature monitoring, autonomous or host-controlled cell balancing, high-side NFET drivers, and secondary fuse protection. It supports ±200 mV current measurement, 400 kHz I²C, SPI, and HDQ interfaces, and temperature sensing through an internal sensor plus up to 9 external thermistors. It operates with up to 85 V on the cell-connect inputs and is housed in a 48-pin TQFP package. #TexasInstruments #BQ76942 #BatteryMonitor #BatteryProtector #BMS #LiIon #LiPo #LiFePO4 #CellBalancing #BatteryManagement #I2C #SPI #EmbeddedSystems

10-Series Li-Ion/LiFePO₄ Battery Monitor and Protector – Multicell battery monitoring and protection IC designed to monitor and protect 3- to 10-series Li-ion, Li-polymer, and LiFePO₄ battery packs. The Texas Instruments BQ7694202PFBR provides cell-voltage, temperature, and current monitoring, integrated cell balancing, high-side NFET protection drivers, and overvoltage, undervoltage, overcurrent, short-circuit, and temperature protection. It supports 400-kHz I²C, SPI, and HDQ communication, includes a high-accuracy coulomb counter, supports an internal temperature sensor plus up to nine external thermistors, and operates from −40°C to +85°C in a 48-pin TQFP package. #TexasInstruments #BQ76942 #BQ7694202PFBR #BatteryMonitor #BatteryProtector #BMS #CellBalancing #LiIon #LiFePO4 #BatteryManagement #I2C #SPI #EmbeddedSystems

Power Management IC (PMIC) with Battery Charger – Integrated power-management IC for small single-cell lithium-ion battery systems, combining a linear battery charger, smart power selector, two 200 mA buck regulators, and three 100 mA LDO regulators. The Analog Devices MAX14745LEWX-T provides programmable regulator outputs, including 0.8–2.375 V / 0.8–3.95 V buck outputs and 0.8–3.6 V / 0.9–4 V LDO outputs. It supports I²C control, thermistor monitoring, power-on reset, voltage sequencing, and operates from −40°C to +85°C in a 36-bump, 0.4 mm-pitch WLP package. #AnalogDevices #MAX14745 #PMIC #BatteryCharger #LiIon #BuckRegulator #LDO #PowerManagement #I2C #EmbeddedSystems

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

NTC Thermistor 10k 0603 (1608 Metric) NTC Thermistor for temperature sensing and compensation applications, the Murata NCP18XH103F03RB is a surface-mount chip thermistor with a nominal resistance of 10 kΩ at 25°C, B constant of 3380 K, and 0603 (1608M) size package. It provides temperature-dependent resistance characteristics for use in electronic temperature detection and control circuits. #NTCThermistor #Thermistor #TemperatureSensor #MurataElectronics #ChipComponent #PCBComponent #TemperatureCompensation #commonpartslibrary #ntc #thermistor #sensor #temperature #transducer

NTC Thermistor 10k 0805 (2012 Metric) The TX08F103F3435ER is a surface-mount NTC (Negative Temperature Coefficient) thermistor designed to measure temperature by changing its resistance as temperature varies. It is commonly used in compact electronics for temperature monitoring, control, and protection circuits. It comes in a small 0805 (2012 metric) SMD package, making it suitable for high-density PCB designs. ⭐ Key Features NTC thermistor (negative temperature coefficient type) Nominal resistance: 10 kΩ @ 25°C B-value: 3435 K (B25/85) High precision: ±1% resistance tolerance B-value tolerance: ±1% SMD package: 0805 (2012 metric size) Wide operating temperature range: -40°C to +125°C Low power dissipation (max ~130 mW) Fast thermal response due to small package size RoHS compliant and suitable for automated PCB assembly Designed for temperature sensing, compensation, and control applications #commonpartslibrary #ntc #thermistor

Stand-alone single-cell linear battery charger with power path BQ24074RGTT is a highly integrated standalone linear charger and power-path management IC from Texas Instruments designed for single-cell Li-Ion/Li-Polymer battery-powered portable devices. It supports charging directly from USB ports or external adapters while simultaneously powering the system load through integrated Dynamic Power Path Management (DPPM). The device is commonly used in portable electronics, IoT devices, wireless accessories, handheld medical devices, and battery-powered embedded systems. Key Features Single-cell Li-Ion/Li-Polymer battery charger Up to 1.5 A programmable charge current Integrated Dynamic Power Path Management (DPPM) USB-compliant charging support Selectable 100 mA / 500 mA USB current limits Programmable input current limit up to 1.5 A Supports both USB input and wall adapters Input overvoltage protection up to 28 V absolute maximum Integrated thermal regulation and thermal shutdown Reverse-current and short-circuit protection Programmable pre-charge and fast-charge safety timers Battery temperature monitoring via NTC thermistor input Charge status outputs for charging/done indication Current monitoring output (ISET) Compact 16-pin VQFN (3×3 mm) package Wide operating temperature range suitable for industrial applications Typical Applications TWS charging cases and earbuds Portable medical devices IoT and asset tracking systems Handheld gaming accessories Video doorbells and IP cameras Portable embedded systems and development boards Important Design Notes Designed specifically for 1-cell battery applications Requires proper thermal PCB layout due to linear charging architecture DPPM allows the system to operate even with a deeply discharged or missing battery Recommended for compact designs needing integrated charging and system power-path control #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Multi-Chemistry 36-VQFN (5x6) The BQ25750RRVR is a highly integrated switch-mode battery charge controller and power-path management device designed for single-cell to multi-cell lithium-ion and lithium-polymer battery-powered systems. The device supports bidirectional power conversion, enabling both battery charging and system power delivery through USB Type-C and other DC power sources. It integrates high-efficiency buck-boost charging architecture to maintain optimal charging performance across a wide input voltage range. The device is intended for portable electronics, industrial handheld equipment, USB Power Delivery applications, embedded systems, and battery-powered computing platforms requiring advanced power management and flexible charging capability. Integrated power-path management allows simultaneous system operation and battery charging while maintaining battery protection and system stability. The BQ25750RRVR supports programmable charging parameters through an I2C interface, including charge voltage, charge current, input current limit, and system power regulation. The device includes comprehensive protection functions such as overvoltage protection, overcurrent protection, thermal regulation, battery temperature monitoring, and fault reporting. High switching frequency operation enables reduced external component size and compact PCB implementation. Features Integrated synchronous buck-boost battery charger Supports USB Power Delivery and wide DC input sources Bidirectional power conversion capability I2C programmable charging and system parameters Integrated power-path management High-efficiency charging operation Supports multi-cell lithium-ion and lithium-polymer batteries Programmable input current and charge current limits Dynamic power management and system voltage regulation Integrated ADC monitoring for voltage, current, and temperature Battery supplement mode during adapter removal OTG boost mode support Thermal regulation and thermal shutdown protection Input overvoltage and overcurrent protection Battery overvoltage protection Safety timer and watchdog timer support NTC thermistor interface for battery temperature monitoring Interrupt and fault status reporting Compact WQFN package suitable for space-constrained designs Electrical Characteristics Wide input operating voltage range Programmable battery charge voltage High charge current capability Integrated low RDS(on) MOSFET drivers High switching frequency operation High conversion efficiency across operating range Low standby and shutdown current consumption Accurate input and charge current regulation Integrated analog-to-digital converter telemetry Interface and Control I2C serial communication interface Programmable charging profiles Configurable protection thresholds Status and interrupt reporting ADC telemetry reporting Enable and control pins for system integration Protection Features Input overvoltage protection Input overcurrent protection Battery overvoltage protection Thermal shutdown protection Thermal regulation control Short-circuit protection Watchdog timer protection Safety charging timer Battery temperature qualification support Package Information Package Type: WQFN Package Suffix: RRV Compact thermally enhanced package Surface-mount device Suitable for automated PCB assembly processes Applications USB Type-C charging systems Portable computers and tablets Industrial handheld devices Power banks and battery packs Embedded battery-powered systems Portable instrumentation Consumer electronics Smart battery charging platforms #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Charger IC Lithium Ion 49-WLP (3.46x3.46) The MAX77962 is a high-performance wide-input 3.2A buck-boost charger with a Smart Power Selector™ and operates as a reverse buck without an additional inductor, allowing the IC to power USB On-the-Go (OTG) accessories. The device integrates low-loss power switches, and provides small solution size, high efficiency, low heat, and fast battery charging. The reverse buck has true-load disconnect and is protected by an adjustable output current limit. The device is highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes a Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up gracefully when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the IC can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using the appropriate I2C commands. Alternatively, the IC can be configured to automatically start charging. ● 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage ● 97% Peak Efficiency at 9VIN/7.4VOUT/1.5AOUT ● Reverse Leakage Protection ● 50mA to 3.15A Programmable Input Current Limit ● 50mA to 3.2A Programmable Constant Current Charge ● Remote Differential Voltage Sensing ● 600kHz or 1.2MHz Switching Frequency Options ● System Instant On with Smart Power Selector PowerPath ● Charge Safety Timer ● Die Temperature Regulation with Thermal Foldback Loop ● Input Power Management with Adaptive Input Current Limit (AICL) and Input Voltage Regulation ● 10mΩ BATT to SYS Switch, Up to 10A Overcurrent Threshold ● Reverse Buck Mode 5.1V/1.5A to Support USB OTG ● JEITA Compliant with NTC Thermistor Monitor ● I 2C or Resistor Programmable ● 3.458mm x 3.458mm 49-Bump WLP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77962