Sensors

Photocells in metal encapsulation for outdoor light sensing applications #commonpartslibrary #sensor #Opticalsensor

Current Sensor 25A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width) #commonpartslibrary #sensor #currentsensor #hallsensor #integratedcircuit

5V Positive Fixed TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS The 7805 is a fixed positive linear voltage regulator IC that provides a regulated +5 V DC output from a higher DC input voltage. It belongs to the widely used 78xx series of voltage regulators, where "05" indicates the 5 V output voltage. The device is commonly used in power supplies for microcontrollers, digital logic circuits, sensors, communication modules, and other electronic systems requiring a stable 5 V supply. It typically requires only a few external capacitors for reliable operation and includes built-in protection features for enhanced robustness. Key Features Fixed 5 V regulated output voltage Output current capability up to 1 A to 1.5 A (depending on manufacturer, package, and thermal conditions) Wide input voltage range (typically up to 35 V maximum) Internal thermal overload protection Internal short-circuit current limiting Safe Operating Area (SOA) protection Requires minimal external components Good line and load regulation Available in common packages such as TO-220, TO-263, and others Suitable for embedded systems, industrial controls, instrumentation, and general-purpose power supplies Typical Applications 12 V to 5 V power conversion Microcontroller and development board power supplies Embedded and IoT devices Digital logic circuits (TTL/CMOS) Sensor and communication module power regulation Educational and hobby electronics projects #CommonPartsLibrary #IntegratedCircuit #PowerManagement

11-Channel Spectral Sensor Frontend The AS7341-DLGM is a multi-channel spectral sensor developed by ams OSRAM, designed for advanced color measurement, spectral analysis, and ambient light sensing applications. The device integrates multiple optical channels covering visible and near-infrared wavelengths, enabling precise detection of light characteristics across a broad spectrum. Its compact surface-mount package, integrated analog front-end, and digital processing capabilities make it suitable for consumer electronics, industrial instrumentation, smart lighting systems, display calibration, agricultural sensing, and portable analytical devices. The sensor features highly sensitive photodiodes combined with optical filters that allow accurate spectral discrimination. Communication is performed through a standard digital interface, facilitating integration with microcontrollers, embedded systems, and IoT platforms. The AS7341 supports configurable measurement modes, programmable gain control, and interrupt functions for efficient system-level implementation. Key Features Multi-channel spectral sensing architecture Visible and near-infrared light detection capability Integrated optical interference filters High-sensitivity photodiode array Ambient light sensing functionality Advanced color measurement and analysis Programmable gain and integration settings Digital output with I²C communication interface Low-power operating characteristics Integrated interrupt and event detection functions Compact surface-mount package Suitable for portable and battery-powered designs High accuracy across varying lighting conditions Supports spectral identification and classification applications Optimized for display, lighting, and environmental monitoring systems Applications Color measurement instruments Spectral analysis equipment Smart lighting control systems Display color calibration Industrial automation sensors Agricultural monitoring devices Ambient light sensing applications Consumer electronics Wearable devices IoT sensing platforms Scientific and laboratory instruments Optical monitoring systems Electrical and Functional Characteristics Multi-channel optical sensing engine Digital signal processing architecture Configurable integration timing Adjustable sensitivity and gain control Low-noise measurement performance High dynamic range operation Fast measurement response capability Integrated spectral filtering technology Embedded register-based configuration Interrupt-driven event monitoring support Mechanical Characteristics Compact surface-mount package PCB-friendly footprint RoHS-compliant construction Suitable for automated assembly processes Optimized optical window design #commonpartslibrary #sensor #opticalsensor #spectralsensor #colorsensor #ambientlightsensor #amsosram #embeddedsystems #industrialelectronics #iot #measurement #environmentalsensing #consumerelectronics #smartlighting #electronicsdesign

Magnetic Sensors QMC5883L LGA-16_L3.0-W3.0-P0.50-BL_SQ The QMC5883L is a multi-chip three-axis magnetic sensor. This surface -mount, small sized chip has integrated magnetic sensors with signal condition ASIC, targeted for high precision applications such as compassing, navigation and gaming in drone, robot, mobile and personal hand-held devices. The QMC5883L is based on our state-of-the-art, high resolution, magneto-resistive technology licensed from Honeywell AMR technology. Along with custom-designed 16-bit ADC ASIC, it offers the advantages of low noise, high accuracy, low power consumption, offset cancellation and temperature compensation. QMC5883L enables 1° to 2° compass heading accuracy. The I²C serial bus allows for easy interface. The QMC5883L is in a 3x3x0.9mm3 surface mount 16-pin land grid array (LGA) package.  3-Axis Magneto-Resistive Sensors in a 3x3x0.9 mm3 Land Grid Array Package (LGA), guaranteed to operate over an extended temperature range of -40 °C to +85 °C.  Small Size for Highly Integrated Products. Signals Have Been Digitized And Calibrated.  16 Bit ADC With Low Noise AMR Sensors Achieves 2 Milli-Gauss Field Resolution  Enables 1° To 2° Degree Compass Heading Accuracy , Allows for Navigation and LBS Applications  Wide Magnetic Field Range (±8 Gauss)  Maximizes Sensor’s Full Dynamic Range and Resolution  Temperature Compensated Data Output and Temperature Output  Automatically Maintains Sensor’s Sensitivity Under Wide Operating Temperature Range  I 2C Interface with Standard and Fast Modes.  High-Speed Interfaces for Fast Data Communications. Maximum 200Hz Data Output Rate  Wide Range Operation Voltage (2.16V To 3.6V) and Low Power Consumption (75A)  Compatible with Battery Powered Applications  Lead Free Package Construction  RoHS Compliance  Software And Algorithm Support Available  Compassing Heading, Hard Iron, Soft Iron, and Auto Calibration Libraries Available #CommonPartsLibrary #Sensor

The SMBJ6.8CA is a bidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from voltage transients caused by electrostatic discharge, lightning-induced surges, inductive load switching, and other transient events. It is commonly used in power supplies, communication interfaces, industrial control systems, automotive electronics, and consumer devices requiring robust overvoltage protection. The device utilizes avalanche breakdown technology to rapidly clamp transient voltages to safe levels, helping prevent damage to downstream components. Its bidirectional configuration makes it suitable for protecting AC lines and signal lines where voltage polarity may reverse. The SMB package provides a compact surface-mount solution with high surge-handling capability and excellent reliability for demanding environments. Features Bidirectional transient voltage suppression diode Fast response time to transient events High peak pulse power dissipation capability Low incremental surge resistance Excellent clamping performance Surface-mount SMB package Protection against ESD and lightning-induced surges Suitable for AC and bidirectional signal line protection RoHS-compliant and halogen-free options available from various manufacturers High reliability and long operational life Electrical Characteristics Reverse standoff voltage optimized for low-voltage applications Avalanche breakdown protection mechanism High peak surge current capability Low leakage current during normal operation Bidirectional voltage clamping characteristics Designed for transient suppression in accordance with industry surge standards Applications Power input protection Communication interfaces Industrial automation equipment Automotive electronic modules Consumer electronics Data and signal line protection Telecom equipment Embedded control systems Sensor interface protection Package Information Package Type: SMB (DO-214AA) Surface-mount technology Compact footprint for PCB integration Suitable for automated assembly processes #commonpartslibrary #semiconductor #tvsdiode #esdprotection #surgeprotection #circuitprotection #transientvoltagesuppressor #powerprotection #electronics #surfaceMountDevice #automotiveelectronics #industrialelectronics

CONN HEADER SMD R/A 3POS 1.25mm The SM03B-GHS-TB(LF)(SN) is a 3-pin, surface-mount, right-angle header connector that mates with JST GH-series wire housings. It provides a reliable, low-profile connection between a PCB and external wires using a crimp-style mating system. It belongs to the JST GH series, known for fine-pitch, compact connectors optimized for miniaturized electronics. 3-position connector (signal/power lines) 1.25 mm pitch for high-density PCB layout Surface-mount, right-angle (horizontal) mounting Shrouded header design for secure mating and alignment Locking ramp mechanism to prevent accidental disconnection Tin-plated contacts for reliable conductivity Lead-free / RoHS compliant (LF/SN finish) Current rating: ~1 A typical Voltage rating: ~50 V Operating temperature: approx. -25 °C to +85 °C 📦 Typical Applications Consumer electronics (wearables, IoT devices) Industrial control modules Robotics and sensor interfaces Battery-powered embedded systems Compact PCB interconnect systems #CommonPartsLibrary #Connector

The NX3225GD 8.000MHz STD-CRA-3 is a surface-mount quartz crystal resonator designed to provide a stable and accurate clock reference for electronic circuits. It is housed in a compact ceramic package suitable for space-constrained applications and is optimized for low power consumption and reliable frequency generation. This crystal is commonly used in microcontrollers, wireless communication modules, industrial control systems, consumer electronics, IoT devices, and embedded systems requiring precise timing and frequency control. Features Fundamental mode quartz crystal resonator Nominal frequency of 8.000 MHz Compact surface-mount ceramic package High frequency stability and accuracy Low equivalent series resistance Suitable for low-power oscillator circuits Excellent aging characteristics RoHS-compliant construction Designed for automated SMT assembly processes Reliable operation across industrial temperature environments Electrical Characteristics Crystal type: Quartz Crystal Resonator Frequency: 8.000 MHz Oscillation mode: Fundamental Load capacitance: Standard load capacitance configuration Frequency tolerance: Standard precision grade Frequency stability: Industrial-grade stability performance Equivalent series resistance optimized for MCU and RF oscillator circuits Low drive level operation High insulation resistance Mechanical Characteristics Surface-mount package Ceramic hermetic enclosure Compact footprint suitable for high-density PCB layouts Compatible with standard reflow soldering processes Designed for automated pick-and-place assembly Applications Microcontroller clock generation Wireless communication devices Bluetooth and RF modules IoT and smart devices Industrial automation equipment Embedded control systems Consumer electronics Timing and synchronization circuits Sensor interface modules Portable battery-powered products Compliance RoHS compliant Lead-free package Environmentally friendly manufacturing standards Suitable for commercial and industrial electronic applications #commonpartslibrary #crystal #quartzcrystal #frequencycontrol #timingdevice #clocksource #oscillator #smtcomponent #embeddedsystems #wirelesscommunication #industrialelectronics #consumerelectronics #iotdevices #passivecomponents #electroniccomponents

Three-Terminal Fixed Positive Voltage Regulator The LM7812T is a three-terminal fixed positive linear voltage regulator IC designed to provide a stable +12V DC output from a higher input voltage source. It belongs to the widely used 78xx series regulators, where “12” indicates the fixed output voltage of 12 volts. It is commonly used in power supply circuits, embedded systems, and electronic devices that require a simple, reliable regulated 12V rail without the complexity of external components. The device operates as a linear regulator, meaning it reduces voltage by dissipating excess energy as heat, so proper heatsinking is often required for higher current loads. Key Features of LM7812T Fixed +12V output voltage Output current up to 1A–1.5A (depending on package and cooling) Input voltage range up to ~35V max Built-in thermal shutdown protection Internal current limiting and short-circuit protection Safe-area compensation for reliable operation No external components required for basic operation Good line and load regulation Low quiescent current (~8 mA typical) Available in TO-220 / TO-3 packages (LM7812T variants) Typical Applications DC power supplies (12V regulated rail) Arduino and microcontroller systems Industrial control electronics Sensor and communication circuits Battery-powered systems requiring stable 12V Audio amplifiers and small motor control circuits #CommonPartsLibrary #IntegratedCircuit #PowerManagement

DC-DC modular power supply, fixed voltage input, isolated non-regulated single-channel output The B0505S-1W is an isolated DC-to-DC converter module designed to provide regulated power conversion with galvanic isolation between input and output stages. This compact power module is commonly used in industrial control systems, embedded electronics, communication equipment, instrumentation, and distributed power architectures where electrical isolation and stable voltage conversion are required. The device converts a nominal DC input voltage to an isolated DC output voltage while maintaining low power consumption and reliable operation. Its fully encapsulated construction enhances thermal performance, electrical insulation, and environmental durability. The B0505S-1W is widely used for noise isolation, ground loop elimination, signal conditioning support, and isolated power distribution in sensitive electronic systems. Engineering Specification Device Type Isolated DC-to-DC power converter module Conversion Topology Fixed-input isolated regulated power conversion Isolation Feature Galvanic isolation between input and output Input Characteristics Designed for nominal low-voltage DC input operation Output Characteristics Regulated isolated DC voltage output Output Power Low-power isolated converter suitable for embedded systems Efficiency Characteristics Optimized power conversion efficiency for compact electronic applications Package Type Encapsulated SIP through-hole module Mounting Style Through-hole mounting Protection Features Isolation protection and stable power conversion characteristics Thermal Characteristics Low thermal dissipation with compact module structure Reliability Features Industrial-grade encapsulated construction for long-term operation Applications Industrial automation Embedded systems Communication equipment Sensor isolation Signal conditioning Data acquisition systems Medical electronics Power distribution networks Ground loop isolation Instrumentation systems Manufacturer Commonly manufactured by Mornsun and compatible power module vendors #commonpartslibrary #dcdcconverter #isolatedconverter #powermodule #powerelectronics #isolatedpower #embeddedhardware #industrialelectronics #powersupply #signalisolation #throughholecomponents #electronicsdesign #powerconversion #galvanicisolation